All articles
Cabinet Refinishing9 min read

Cabinet Refacing Process Without Rebuilding Your Kitchen

Follow the cabinet refacing process from box assessment to final inspection, with practical guidance on scope, measurements, new fronts and quality checks.

Cabinet refacing replaces suitable existing cabinet doors and drawer fronts while keeping the cabinet boxes and generally the existing kitchen layout. The process includes assessment, design and measurement decisions, removal and preparation, production and finishing of new fronts, on-site work, reinstallation, alignment and final inspection. Related reading: Tooling refurbishment process.

For a Toronto homeowner, the key question is whether the boxes are sound and the layout already works. If they are, refacing can create a substantial visual change without rebuilding the cabinetry system.

What cabinet refacing changes, and what it leaves unchanged

Cabinet refacing changes the visible front of the kitchen. New fronts can introduce a different profile, colour, sheen and hardware style while suitable cabinet boxes remain in place.

The existing cabinet runs, sink, range, refrigerator and general storage geometry usually stay where they are. Refacing is a front-facing upgrade, not a layout redesign.

Refacing, refinishing or replacement?

Choose refacing when the layout suits your routine, the cabinet boxes are structurally sound and the main problem is the door style, drawer fronts or visible appearance. New components can create a different look while the underlying boxes remain.

Choose refinishing when you like the existing door profile and want to change its colour or coating. Refinishing keeps suitable existing doors and changes their finish, while refacing replaces the doors and drawer fronts. If you still need to assess box condition and layout suitability, read Kitchen Cabinet Refacing in Toronto: Is It Right?

Consider replacement or a broader renovation when the boxes have swelling, water damage, loose construction or severe structural wear, or when cabinet runs and appliances must move. New fronts cannot correct a structural problem behind them.

OptionWhat changesBest fit
RefacingNew doors and drawer fronts, plus agreed visible surfaces and hardwareSound boxes, a workable layout and an outdated front style
RefinishingA new finish on suitable existing doors and other agreed surfacesThe door profile works, but the colour or coating does not
ReplacementSome or all of the cabinetry system and potentially the layoutUnsuitable boxes, changing storage needs or reconstruction

Choose colour for the kitchen you have

No colour is guaranteed to look outdated in 2026. A lasting choice comes from judging a physical sample beside your countertop, backsplash, flooring, wall colour and natural light.

Choose from the available colour range during the assessment and view the final sample in the kitchen, since screen images are approximations. Sheen also affects how strongly light reflects from the fronts and how the colour reads across the room.

Prepare for the assessment before new fronts are ordered

A useful assessment needs more than one photograph of the sink wall. The installer should understand the cabinet condition, component types and visible surfaces that must coordinate with the new fronts.

Photograph the full kitchen and problem areas

  • Take wide views of every cabinet run from more than one angle.
  • Photograph a representative door from the front and back.
  • Show drawer construction, hinges and doors or drawers that do not align.
  • Include the island, pantry, appliance panels, glass frames, crown, valances and exposed end panels.
  • Take close-ups of peeling, swelling, cracks, worn edges, stains, moisture damage and previous repairs.
  • Include the countertop, backsplash, flooring and nearby wall colour.

Grooves, decorative profiles, glass frames, mixed materials and fixed panels can change the preparation required. The assessment should account for them, not just the number of doors.

Settle the design decisions

Before production, identify the door profile, material, colour, sheen and drawer-front style. Decide whether hardware is staying, being replaced or supplied separately. Ask how existing holes, hinges and marks will be handled.

Also identify fillers, finished end panels, toe-kicks, trim, island backs, pantry faces and appliance panels. New doors can look disconnected if nearby exposed surfaces are omitted from the plan.

Do not treat an approximate door count as a final production measurement. Dimensions, hinge compatibility, drawer construction and the visible scope should be verified before new components are made.

Plan the measurements before ordering

For each door, record its opening, overall size, hinge side and overlay, which is the amount the front covers the cabinet frame. Record drawer-front width and height separately because drawer faces are not interchangeable with doors.

  • Number each opening and match it to a labelled photo.
  • Record door width, height, thickness and swing direction.
  • Note hinge type, hinge position and whether the door is inset, partial overlay or full overlay.
  • Measure drawer fronts separately and note the drawer-box construction behind them.
  • Record the width and height of exposed end panels, fillers, appliance panels, island sides and pantry faces.
  • Mark unusual conditions such as uneven frames, gaps, angled corners, glass doors or decorative profiles.

Overlay measurements are easy to misread when frames are uneven or several door sizes look similar. Use these notes to support the assessment, but have the installer verify final dimensions, hinge compatibility and drilling details before ordering.

The cabinet refacing process from assessment to inspection

A typical refacing project moves from suitability and scope decisions to component preparation, new-front production, finishing and installation. The exact sequence depends on the cabinet condition, selected materials, visible scope and amount of on-site work.

1. Assessment and written scope

The first stage reviews the boxes, layout, doors, drawer fronts and exposed surfaces. The scope should distinguish what remains, what is replaced, what is finished on site and what repairs or extra work are needed.

2. Removal and identification

Doors, drawer fronts and hardware are removed so each component can be assessed and prepared. Labelling components and recording hinge and hardware positions helps preserve the relationship between each front and its opening.

The practical disruption depends on the number of components, on-site work and installation schedule. A fixed duration should not be assumed before the scope is confirmed.

3. Cleaning, repairs and preparation

Removable fronts and drawer fronts are cleaned and prepared before finishing or replacement. Fixed boxes, face frames and trim are assessed for the preparation and finish required on site.

Peeling coatings, worn edges, moisture damage, uneven surfaces and previous repairs should be identified before the finish or replacement scope is approved.

4. New-front production and finishing

Replacement doors and drawer fronts are produced to the agreed profile, material and dimensions. Depending on the selected system, finishing may involve spray-applied lacquer or another coating suited to cabinetry, applied under controlled conditions for an even result.

Fixed boxes and trim are handled separately where on-site finishing is included. The quote should state which fixed surfaces receive that treatment.

5. Reinstallation and alignment

New and finished components are reinstalled, hardware is fitted or refitted and doors and drawers are aligned. This stage includes checking reveals, clearances, hinge movement and drawer travel.

One P2D project combined refacing with new doors and handles, a countertop and a backsplash. Those additions are not automatic requirements for every refacing project.

6. Inspection and handover

The final inspection checks operation, alignment, finish and the agreed scope. Walk through the kitchen before approval with the written scope available. You can also review the cabinet finishing process for a broader view of the work stages.

Define the complete visible scope, not just the door count

A door count is only one part of a refacing project. The quote should identify every component affecting the finished sightline, installation and coordination.

ComponentQuestion to settle
Doors and drawer frontsHow many are replaced, and are drawer fronts counted separately?
Boxes and face framesWhich fixed surfaces remain, and which are prepared or finished?
End panels and fillersAre exposed sides, fillers and appliance panels included?
Island and pantryAre backs, sides, trim and visible pantry components included?
Glass frames and trimWill grooves, profiles, crown, valances and frames be replaced or finished?
HardwareIs it retained, supplied, installed, repositioned or excluded?
RepairsAre worn edges, damage and alignment problems included?

Refacing retains suitable cabinet boxes, but the finished result still depends on panels, fillers, trim and other fixed elements around the new fronts. Ask for each item to be named instead of relying on “complete kitchen.”

Plan the quote and compare scopes fairly

There is no single cabinet refacing price for every Toronto kitchen. Cost is affected by the number of doors, drawer fronts and finished panels, the condition and material of the cabinetry, the choice between new fronts and refinishing, colour and sheen, hardware, repairs and installation.

Other variables include removal, off-site production, on-site protection, reinstallation, taxes, warranty terms and exclusions. A lower headline price may omit visible surfaces, preparation or installation, so compare the included scope.

Questions to ask before approving a quote

  • Which doors, drawer fronts, boxes, face frames, panels, fillers and trim are included?
  • Which components are new, which remain and which are finished on site?
  • Are repairs and preparation included, listed as allowances or excluded?
  • Who supplies the fronts, hardware, hinges and installation materials?
  • Are removal, reinstallation, alignment, cleanup, taxes and protection included?
  • What colour, sheen, profile and material are specified?
  • What warranty terms and exclusions apply?
  • What scheduling constraints affect removal and installation?

Send wide kitchen views, representative doors, damage close-ups, an approximate component count, your postal code and preferred timing. This gives the assessor a better starting point than a single image.

What refacing can improve, and what it cannot change

Refacing can change door profiles, drawer fronts, colour, sheen, hardware and coordinated exposed surfaces. It can make an older kitchen feel more consistent when worn or mismatched fronts are replaced as one planned scope.

It does not automatically move walls, appliances, sinks or cabinet runs. It also does not create new storage geometry or correct an unsuitable cabinet box. If the main problem is workflow, storage or appliance position, describe that need before choosing a front-focused solution.

Inspect the finished refacing project before sign-off

Inspect the kitchen in normal lighting and operate every door and drawer before approval. Confirm both visible quality and the scope that was agreed.

  • Doors sit evenly and neighbouring reveals are consistent.
  • Hinges operate smoothly without rubbing or binding.
  • Drawers open and close fully without rubbing.
  • Hardware is secure and consistently placed.
  • Edges, corners and profiles are cleanly finished.
  • Boxes, face frames, trim, panels, fillers, islands and pantries coordinate where included.
  • Appliance panels, exposed ends and decorative surfaces listed in the scope are present and finished.
  • The work area is clean and hardware and accessories are accounted for.

Record unresolved alignment, surface, hardware or scope issues before sign-off. A written list is more useful than trying to remember several concerns after installation.

Your next step for a Toronto cabinet refacing project

Prepare kitchen photos, representative door and drawer-front images, your postal code, an approximate count, problem areas, desired style and preferred timing. For a Toronto assessment and written scope, P2D Refinishing can discuss professional cabinet refacing based on the condition of your boxes and the change you want.

Free photo quote

Send kitchen photos and tell us what you want to change.

Request a Quote